Ramsey-winch REP-8000 24V MOTOR REPLACEMENT 251277 Manual de usuario

Busca en linea o descarga Manual de usuario para Para El Coche Ramsey-winch REP-8000 24V MOTOR REPLACEMENT 251277. Ramsey Winch REP-8000 24V MOTOR REPLACEMENT 251277 User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 4
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
REP 8000 24V MOTOR REPLACEMENT KIT
#251277
This kit replaces an existing 24V permanent magnet motor on a Ramsey REP 8000 winch with a new series wound
motor. Refer to the parts list on page 4 for a complete list of items in this kit.
Before you begin, disconnect the solenoid battery leads from the battery and remove winch from mounting. Place
winch on flat work surface.
1. Disconnect motor leads and remove solenoid from motor and set
solenoid aside.
2. Remove tie bar bolts and tie bars from winch and set aside.
3. Lift motor end bearing from drum and discard. Install the
drum bushing (item #4) into the bore of the new motor
end bearing (item #1). Note: The drum bore has a cast-
in key which the split in the drum bushing must straddle.
4. Apply grease (Moreplex NLGI 2 or equivalent) sparingly to
the I.D. of the drum bushing.
913401-0505-A
RAMSEY WINCH COMPANY
PO BOX 581510 - TULSA OK 74158-1510
www.ramsey.com
Vista de pagina 0
1 2 3 4

Indice de contenidos

Pagina 1 - RAMSEY WINCH COMPANY

REP 8000 24V MOTOR REPLACEMENT KIT#251277This kit replaces an existing 24V permanent magnet motor on a Ramsey REP 8000 winch with a new series woundmo

Pagina 2

5. Install new motor end assembly (item #1) on drum aligningmotor shaft with brake coupling.6. Reinstall tie bars using (2) 1/4-20UNC x 3/4” capscrews

Pagina 3

11. Label motor leads coming out of solenoid assemblyas shown:12. Re-install cover on solenoid assembly.13. Install boots (item #8) on existing motor

Pagina 4

ITEM NO. QUANTITY PART NO. DESCRIPTION1 1 296591 REPLACEMENT MOTOR END BEARING ASSEMBLY, 24V2 1 289115 MOTOR LEAD WIRE ASSEMBLY #6 GA 17” LONG3 1 2892

Comentarios a estos manuales

Sin comentarios